Строительство лучшего глиняного кирпичного завода в Китае

 NEW Build best clay brick making factory with dryer 

глиняная кирпичная машина Jianbes подходит для глиняных, сланцевых, угольных пород, пылевого угля, шлака, горных шламов, ила и других глиняных кирпичных заводов для производства обычных сплошных кирпичей, полых кирпичей и других продуктов требуемого сечения.

Из сушилки строятся лучшие глиняные кирпичные заводы, из сырья делают кирпичи.

    Build best clay brick making factory with dryer produce different bricks like clay solid bricks and clay hollow bricks.

Baoshen

Бёшен кирпич

Серия Baoshen кирпичных машин имеет более 40 сортов, более 100 спецификаций, продукция экспортируется в Казахстан, Узбекистан, Кыргызстан, Таджикистан, Россию, Непал, Судан, Южную Африку, Уганду, Монголию, Аргентину, Ливию, Перу, Венесуэлу, Бангладеш, Индию и другие страны, завоевала широкую репутацию и похвалу.

Production Strength:

1)Baoshen brick machine company

2)Machining production workshop to produce clay brick machine.

    Baoshen good quality clay brick machinery company not only provides customer with various fully automatic brick machine for Build best clay brick making factory with dryer,but also provides services like brick making process design of solid brick &hollow brick,brick kiln design and build,brick dryer design and build,brick factory turn key project contract.

Best clay brick production line

   Baoshen brick machine for Build best clay brick making factory with dryer,clay brick production line

clay brick making  factory including fully automatic clay brick machine, brick dryer(small tunnel dryer & chamber dryer) for drying and brick kiln (hoffman kiln&tunnel kiln)for firing.

Baoshen Brick machine in one build and Build best clay brick making factory with dryer including:

clay brick making process

   Large capacity brick machine for brick making process in build and design best clay brick making factory with dryer,including many different clay brick machinery.

1.taking clay with box feeder ,belt conveyor  carry clay to roller crusher to crush under 5 mm.

2.crushing clay under 5 mm, belt conveyor carry clay to double shaft mixer to mix clay.and then use fineness roller crusher to crush clay under 3 mm.

3.after fineness roller crusher,the clay is under 3 mm. belt conveyor  carry clay to extrusion mixer to mix again,which to enhance the plasticity to make good brick.and then extruding wet column brick with High pressure extruder brick machine.

4.after extruding wet column brick,cutting column brick under 1.0-1.5 m,use the automatic brick cutter to cut piece brick.with different capacity.

5.after cutting bricks,manual stacking wet bricks on to dryer car, The dryer cart is sent to the inlet of drying chamber by ferry cart.

6. Dry the unfired brick in small tunnel dryer and the heat source comes from the residual heat of hoffman kiln.

7. After drying in small tunnel drying chamber, the unfired bricks are sent onto hoffman kiln by the tractor with Three wheel carts.

8. workers manual stacking dried bricks into the hoffman kiln

9.firing 24-30 hours,the hoffman kiln work circulate ,the fire cycle is one week.getting finished bricks every day due to your capacity. after firing well,manual unloading finished bricks on to the finished bricks cart .

Build best Clay brick making factory with dryer

        Adopt nature dry&hoffman kiln and mechanical production process of second setting & burning.

1. Raw material & fuel preparation and handling

1)Send clay raw material to box feeder with loader. Send the clay raw material to double-roll crusher for preliminary crushing .

2)Preliminary crushed material is conveyed to twin-shaft mixing machine for adding water and agitating through belt conveyer.

3)After mixing of the first working procedure, the raw material is again sent to intense agitation extruder and high speed fine pulverizing double roll grinder for supplement water and agitating the raw material.

2. Molding

1)The molding water content rate should be controlled within 16%-18%.

2)The vacuum pump will take out the air that entered into the extruding machine together with pug. The vacuum extruder will extrude the pug from machine mouth and then, carry out slitting & parting according to the required dimension.

3. Drying

1)When the unfired bricks cut by cutter and arranged into groups, they are set by manual onto the dryer cart.

2) The drying chamber work system has heating system, regulating system and moisture excluding system. The drying quality is controlled by regulating system.

4. Burning

1)After drying , the unfired bricks are sent onto hoffman kiln by the dried brick cart, workers stack the bricks into the hoffman kiln for burning.

2)The properly burned bricks are sent onto the Finished brick cart by workers.

Build best Clay brick making factory wtih dryer area

The plant floor area is not less than 16,000m².

The building area is not less than 1,300m².

Build best clay brick making factory with dryer layout