Belt Box Feeder

Belt Box Feeder

Belt Box Feeder

Product Introduction of Belt Box Feeder:

Box Feeder is one of feeder’s equipments which balances and rations the materials that you feed in. By adjusting the height of flash board and the speed of conveyor belt, it will control the quantity of feed-in raw materials, balance pug and internal combustion material proportionally, and crush the large soft mud.

Advantages:

Simple structure,Low cost,delivering a high (18%-24%) moisture content of raw materials,the most widely used box feeder

Technical Parameters:

Type Capacity ( m³/h) Power(KW) Size Moisture Raw materialInput size(mm)
GD50X250 10~25 4 2650X1600X1260 ≤18%~24% <250
GD60X300 20~30 5.5 3670X1890X1470 ≤18%~24% <250
GD80X400 20~50 7.5 4670X2050X1470 ≤18%~24% <250
GD100X500 45~80 6~7.5 5560X2250X1470 ≤18%~24% <250

Write a Message

Your email address will not be published.

Related Posts

 raw material for making bricks 

 raw material for making bricks 

1. Strong applicability, high output. Good choice for big project; 2. The raw material for making bricks can be clay,fly ash,coal gangue,shale,urban construction waste,gangue waste,inferior soil,etc 3. High vacuum and pressure extrusion,can make strong solid bricks and hollow bricks with qualified holes. The size of solid brick and the holes of hollow bricks can be changed according to your needs. 4. This model is hot sale in Bangladesh, Egypt, Saudi Arabia, Algeria etc. There are two kinds of kiln for you to choose: tunnel kiln, hoffman kiln. Hoffman kiln with tunnel dryer is also good for this production line. (cost less than tunnel kiln and more efficient than hoffman kiln) If you want to learnmore information, please contact us. Different types of augers are…Read more