ZQP Program Control Auto column cutting machine

Product Introduction:It consists of program control and air promotion slitter and light cutter It\’s suitable for the product line of small sca…

Product Introduction:

It consists of program control and air promotion slitter and light cutter
It’s suitable for the product line of small scale,soft plasticity and semi hard plasticity.
To realize automatic and semi-automatic operation.

Structural characteristics:
1.) Automatic equipment of defending leaning:Never cut obliquely and no need to adjust.
2.) Stainless steel cylinder table-board:mud strips reaches the right place automatically; accurate positioning to avoid wasting the mud; saving oil 70%-100% than the normal table-board.
3.) Stainless steel push board: wear resistant, the working life is longer 3 times than the normal one.
4.) Oriented angle and Oriented arc: high accuracy to make the steel wires go into groove, reduce 70% broken steel wires averagely.
5.) High-abrasive material craft: Leader is hard chrome plate and the compound oriented bearing. Its resistance is small and its working life is long.
6.) Buffer power accumulator: absorb return impact, and translate it to push power.
7.) High strength, large thrust: mainly usages for the mud strip whose original material is coal gangue and shale.It’s suitable for different soft and hard plasticity mud strips: it’s saving oil When usages for high sand content mud or other inferior mud; if the mud strips is very soft, the expansion table-board should be intense in advance.

Product Parts:

Alloy mixer blades

Alloy hollow brick mould

Alloy brick mould


Thrust bearing


Auger adopts high chromium raw materials,the auger front part can produce 25million bricks,the auger back part can produce 45 million bricks one time. High load capacity to admit any pressure from soft to stiff extrusion condition. Reducers with parallel shafts,case hardened and ground helical gears to ensure secure,progressive transmission and quiet operation and long durability.

Extruder shaft


Extruder shaft and gear adopts heat treatment.If with proper maintenance,we can give at least 4 years guarantee for gears and shaft. 1.Hinged body.Easy opening for maintenance tasks and part replacement.

2.Highly wear resistant chrome alloy liners with a bolt-free system,preventing air leaks and making replacement operations easier.

Making different bricks:




Technical Parameters:

Model Capacity pic/hour Cutting length     Power Dimensions
QT450 5000~25000 950~1280 mm      1.5 Kw 3340*1410*1840mm
QT550 15000~30000 1620~2300 mm      1.5 Kw 3340*1710*1840mm